1-866-494-4610

Johnson Controls FX-ZFR1811-1 Wireless Field Bus Router

Johnson Controls FX-ZFR1811-1 Wireless Field Bus Router
Images for general purposes only. Actual may be different than depicted.
Johnson Controls FX-ZFR1811-1 Wireless Field Bus Router Johnson Controls FX-ZFR1811-1 Wireless Field Bus Router Johnson Controls FX-ZFR1811-1 Wireless Field Bus Router

Johnson Controls FX-ZFR1811-1 Wireless Field Bus Router

SKU: FX-ZFR1811-1
Rating:
* This Product is Now Obsolete
No Replacement Available
0
0
0
0
0
FX-ZFR1811-1
A FX-ZFR1811 Wireless Field Bus Router is used with an FX-PC Series Programmable Controller (FX-PCA, FX-PCG, FX-PCX, and FX-PCV).
The FX-ZFR1811 Router provides a wireless interface between:
  • an FX-PC controller and the FX Supervisory Controller (by means of an FX-ZFR1810 Coordinator)
  • an FX-PC controller and associated FX-WRZ Series Wireless Room Sensors
Additionally, the FX-ZFR1811 Wireless Field Bus Router can be used as a repeater in FX-WRZ-7860-0 One-to-One Wireless Room Temperature Sensing System.

Important: Use the FX-ZFR1811 Wireless Field Bus Router only to provide an input to equipment under normal operating conditions. Where failure or malfunction of the FX-ZFR1811 Router could lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be designed into the control system. Incorporate and maintain other devices, such as supervisory or alarm systems or safety or limit controls, intended to warn of or protect against failure or malfunction of the FX-ZFR1811 Router.

Important: The FX-ZFR1800 Series Wireless Field Bus System is not designed or intended for use in mission-critical or life/safety applications.

Up to nine FX-WRZ Series Sensors can be associated with a single field controller. In multi-sensor applications, the FX-ZFR1811 Router passes all the sensor data to a FX-PC controller, which can be configured to either average the sensors’ input or select the highest or lowest sensed condition for control of the target zone. An FX-ZFR1811 Router is powered directly from the connected field controller’s 15 VDC output. The Router can also be powered by the power supply in the Repeater Accessory Kit to serve as a stand-alone repeater, extending the range of the communications within the wireless mesh network.
 

Features:

  • Wireless Communications for a Facility Explorer System
  • Wireless Mesh Network
  • Improved Application Mobility and Flexibility
  • Support of up to Nine FX-WRZ Series Wireless Room Sensors per Wirelessly Enabled Field Controller
  • Multiple Diagnostic Light-Emitting Diodes (LEDs)
  • Compact, Easy-to-Install, and Versatile

Q & A: Ask the Questions, share answers

Do you have questions about this product?